Syphonic drainage is a very simple process. Unlike traditional roof drainage, which is designed to flow part full, a syphonic system operates at full capacity. At full capacity the syphonic drainage system usilises vacuums to pull water through the system, maximising efficiency and cleaning the system, minimising maintenance requirements.
Syphonic drainage is a very simple process. Unlike traditional roof drainage, which is designed to flow part full, a syphonic system operates at full capacity.
Conventional systems are simply a hole set into the lowest point on the roof, into which the water falls, the syphonic drain allows only water to be drawn of the roof. During heavy rainfall the outlet drain fills and cuts air flow into the pipe. This lack of air, coupled with the downward pull of the water creates a vacuum. The drainage pipes then flow at 100% full over the entire system.
Several outlet drains can be connected to a single collector pip. This means that the pipe can be laid without fall directly under the roof covering, with numerous outlet drains discharging into it. The collector pipe is routed to a single downpipe. When the pipes fill, the water in the downpipe wants to fall. This action causes the water in the horizontal collector pipe to be pulled through the downpipe to replace the water flowing out. The water pressure in the system falls below atmospheric pressure and water on the roof is sucked into the connected drains. On reaching the ground, the water travels into a vented manhole or inspection chamber where it is discharged at atmospheric pressure into the storm sewer.
Benefits of a Syphonic Rainwater Drainage System:
- Syphonic systems require fewer outlets and downpipes than a Gravity equivalent
- Collection mains can be routed horizontally throughout the building, no need for pipes to be fitted on a gradient
- Multiple rainwater outlets can be connected to a single connector
- Up to 80% fewer downpipes are required, resulting in cost savings in materials and reducing associated groundwork. Also gives architects more freedom with design
- Pipe diameters are smaller due to full volume discharge
- Complete control over downpipe discharge location gives increased design and programme flexibility
- Rainwater can be easily routed to collection tanks for future recycling, e.g. irrigation, fire ponds, sanitation etc.
- The rainwater pipes are designed to run 100% full of water at high velocity from roof level to ground level, vastly increasing the capacity of the system when compared to traditional methods of roof drainage
- Acceleration of construction programme due to reduced installation period
- Designs can be varied to cater for a range of specifier requirements (for example protection levels & pipe specification)
- The system is technically sophisticated with each individual building requiring its own specially-designed system based on well-established hydraulic engineering principles
- Syphonic systems are self-cleansing because of the high flow rates, thereby minimising maintenance costs
- Downpipes are generally located inside buildings which provides visual enhancement in the majority of situations